Add support for LCD (ST7789)

This commit is contained in:
JF 2019-12-05 19:23:46 +01:00
parent 66182d15bc
commit adf405a230
8 changed files with 645 additions and 39 deletions

View file

@ -264,12 +264,12 @@ macro(nRF5x_setup)
list(APPEND SDK_SOURCE_FILES
"${NRF5_SDK_PATH}/components/libraries/gfx/nrf_gfx.c"
"${NRF5_SDK_PATH}/integration/nrfx/legacy/nrf_drv_spi.c"
# "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_spi.c"
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_spim.c"
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/prs/nrfx_prs.c"
# "${NRF5_SDK_PATH}/integration/nrfx/legacy/nrf_drv_spi.c"
# "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_spim.c"
# "${NRF5_SDK_PATH}/modules/nrfx/drivers/src/prs/nrfx_prs.c"
"${NRF5_SDK_PATH}/components/drivers_ext/st7735/st7735.c"
# "${NRF5_SDK_PATH}/components/drivers_ext/st7735/st7735.c"
"${NRF5_SDK_PATH}/external/thedotfactory_fonts/orkney24pts.c"
)
#BLE S132

View file

@ -31,12 +31,16 @@ list(APPEND SOURCE_FILES
Logging/NrfLogger.cpp
BlinkApp/BlinkApp.cpp
main.cpp
drivers/st7789.cpp
drivers/spi_master_fast.cpp
)
set(INCLUDE_FILES
Logging/Logger.h
Logging/NrfLogger.h
BlinkApp/BlinkApp.h
drivers/st7789.h
drivers/spi_master_fast.h
)
nRF5x_addExecutable(pinetime-app "${SOURCE_FILES}")

View file

@ -0,0 +1,176 @@
/* Copyright (c) 2015 Nordic Semiconductor. All Rights Reserved.
*
* The information contained herein is confidential property of Nordic
* Semiconductor ASA.Terms and conditions of usage are described in detail
* in NORDIC SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
*
* Licensees are granted free, non-transferable use of the information. NO
* WARRANTY of ANY KIND is provided. This heading must NOT be removed from
* the file.
*
*/
#include "spi_master_fast.h"
#include <string.h>
#include "nrf_gpio.h"
#include "nrf_delay.h"
static SPI_config_t spi_config_table[2];
static NRF_SPI_Type *spi_base[2] = {NRF_SPI0, NRF_SPI1};
static NRF_SPI_Type *SPI;
uint32_t* spi_master_init(SPI_module_number_t spi_num, SPI_config_t *spi_config)
{
if(spi_num > 1)
{
return 0;
}
memcpy(&spi_config_table[spi_num], spi_config, sizeof(SPI_config_t));
/* Configure GPIO pins used for pselsck, pselmosi, pselmiso and pselss for SPI0 */
nrf_gpio_cfg_output(spi_config->pin_SCK);
nrf_gpio_cfg_output(spi_config->pin_MOSI);
nrf_gpio_cfg_input(spi_config->pin_MISO, NRF_GPIO_PIN_NOPULL);
nrf_gpio_cfg_output(spi_config->pin_CSN);
/* Configure pins, frequency and mode */
spi_base[spi_num]->PSELSCK = spi_config->pin_SCK;
spi_base[spi_num]->PSELMOSI = spi_config->pin_MOSI;
spi_base[spi_num]->PSELMISO = spi_config->pin_MISO;
nrf_gpio_pin_set(spi_config->pin_CSN); /* disable Set slave select (inactive high) */
spi_base[spi_num]->FREQUENCY = (uint32_t)spi_config->frequency << 24;
spi_base[spi_num]->CONFIG = spi_config->config.SPI_cfg;
spi_base[spi_num]->EVENTS_READY = 0;
/* Enable */
spi_base[spi_num]->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos);
return (uint32_t *)spi_base[spi_num];
}
bool spi_master_tx_rx(SPI_module_number_t spi_num, uint16_t transfer_size, const uint8_t *tx_data, uint8_t *rx_data)
{
volatile uint32_t *SPI_DATA_READY;
uint32_t tmp;
if(tx_data == 0 || rx_data == 0)
{
return false;
}
SPI = spi_base[spi_num];
SPI_DATA_READY = &SPI->EVENTS_READY;
/* enable slave (slave select active low) */
nrf_gpio_pin_clear(spi_config_table[spi_num].pin_CSN);
*SPI_DATA_READY = 0;
SPI->TXD = (uint32_t)*tx_data++;
tmp = (uint32_t)*tx_data++;
while(--transfer_size)
{
SPI->TXD = tmp;
tmp = (uint32_t)*tx_data++;
/* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
while (*SPI_DATA_READY == 0);
/* clear the event to be ready to receive next messages */
*SPI_DATA_READY = 0;
*rx_data++ = SPI->RXD;
}
/* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
while (*SPI_DATA_READY == 0);
*rx_data = SPI->RXD;
/* disable slave (slave select active low) */
nrf_gpio_pin_set(spi_config_table[spi_num].pin_CSN);
return true;
}
bool spi_master_tx(SPI_module_number_t spi_num, uint16_t transfer_size, const uint8_t *tx_data)
{
volatile uint32_t dummyread;
if(tx_data == 0)
{
return false;
}
SPI = spi_base[spi_num];
/* enable slave (slave select active low) */
nrf_gpio_pin_clear(spi_config_table[spi_num].pin_CSN);
SPI->EVENTS_READY = 0;
SPI->TXD = (uint32_t)*tx_data++;
while(--transfer_size)
{
SPI->TXD = (uint32_t)*tx_data++;
/* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
while (SPI->EVENTS_READY == 0);
/* clear the event to be ready to receive next messages */
SPI->EVENTS_READY = 0;
dummyread = SPI->RXD;
}
/* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
while (SPI->EVENTS_READY == 0);
dummyread = SPI->RXD;
/* disable slave (slave select active low) */
nrf_gpio_pin_set(spi_config_table[spi_num].pin_CSN);
return true;
}
bool spi_master_rx(SPI_module_number_t spi_num, uint16_t transfer_size, uint8_t *rx_data)
{
if(rx_data == 0)
{
return false;
}
SPI = spi_base[spi_num];
/* enable slave (slave select active low) */
nrf_gpio_pin_clear(spi_config_table[spi_num].pin_CSN);
SPI->EVENTS_READY = 0;
SPI->TXD = 0;
while(--transfer_size)
{
SPI->TXD = 0;
/* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
while (SPI->EVENTS_READY == 0);
/* clear the event to be ready to receive next messages */
SPI->EVENTS_READY = 0;
*rx_data++ = SPI->RXD;
}
/* Wait for the transaction complete or timeout (about 10ms - 20 ms) */
while (SPI->EVENTS_READY == 0);
*rx_data = SPI->RXD;
/* disable slave (slave select active low) */
nrf_gpio_pin_set(spi_config_table[spi_num].pin_CSN);
return true;
}

View file

@ -0,0 +1,147 @@
/* Copyright (c) 2015 Nordic Semiconductor. All Rights Reserved.
*
* The information contained herein is confidential property of Nordic
* Semiconductor ASA.Terms and conditions of usage are described in detail
* in NORDIC SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
*
* Licensees are granted free, non-transferable use of the information. NO
* WARRANTY of ANY KIND is provided. This heading must NOT be removed from
* the file.
*
*/
#ifndef __SPI_MASTER_FAST_H
#define __SPI_MASTER_FAST_H
#include <stdbool.h>
#include <stdint.h>
#define SPI_FAST_DEFAULT_CONFIG {.pin_SCK = 1, .pin_MOSI = 2, .pin_MISO = 3, .pin_CSN = 4, \
.frequency = SPI_FREQ_1MBPS, .config.fields.mode = 0, .config.fields.bit_order = SPI_BITORDER_MSB_LSB}
/**
* SPI master operating frequency
*/
typedef enum
{
SPI_FREQ_125KBPS = 0x02, /*!< drive SClk with frequency 125Kbps */
SPI_FREQ_250KBPS = 0x04, /*!< drive SClk with frequency 250Kbps */
SPI_FREQ_500KBPS = 0x08, /*!< drive SClk with frequency 500Kbps */
SPI_FREQ_1MBPS = 0x10, /*!< drive SClk with frequency 1Mbps */
SPI_FREQ_2MBPS = 0x20, /*!< drive SClk with frequency 2Mbps */
SPI_FREQ_4MBPS = 0x40, /*!< drive SClk with frequency 4Mbps */
SPI_FREQ_8MBPS = 0x80 /*!< drive SClk with frequency 8Mbps */
} SPI_frequency_t;
/**
* SPI master module number
*/
typedef enum
{
SPI0 = 0, /*!< SPI module 0 */
SPI1 /*!< SPI module 1 */
} SPI_module_number_t;
/**
* SPI mode
*/
typedef enum
{
//------------------------Clock polarity 0, Clock starts with level 0-------------------------------------------
SPI_MODE0 = 0, /*!< Sample data at rising edge of clock and shift serial data at falling edge */
SPI_MODE1, /*!< sample data at falling edge of clock and shift serial data at rising edge */
//------------------------Clock polarity 1, Clock starts with level 1-------------------------------------------
SPI_MODE2, /*!< sample data at falling edge of clock and shift serial data at rising edge */
SPI_MODE3 /*!< Sample data at rising edge of clock and shift serial data at falling edge */
} SPI_mode_t;
/**
* SPI master bit ordering
*/
typedef enum
{
SPI_BITORDER_MSB_LSB = 0, /*!< Most significant to least significant bit */
SPI_BITORDER_LSB_MSB /*!< Least significant to most significant bit */
} SPI_bit_order_t;
/**
* Struct containing all parameters necessary to configure the SPI interface
*/
typedef struct
{
union
{
uint8_t SPI_cfg; /*!< Bit mode and bit order merged, as in the SPI CONFIG register */
struct
{
uint8_t bit_order : 1; /*!< SPI master bit order */
uint8_t mode : 2; /*!< SPI master mode */
uint8_t : 5; /*!< Padding */
}fields;
}config;
uint8_t frequency; /*!< SPI master frequency */
uint8_t pin_SCK; /*!< SPI master SCK pin */
uint8_t pin_MOSI; /*!< SPI master MOSI pin */
uint8_t pin_MISO; /*!< SPI master MISO pin */
uint8_t pin_CSN; /*!< SPI master chip select pin */
} SPI_config_t;
/**
* Initializes given SPI master with given configuration.
*
* After initializing the given SPI master with given configuration, this function also test if the
* SPI slave is responding with the configurations by transmitting few test bytes. If the slave did not
* respond then error is returned and contents of the rx_data are invalid.
*
* @param module_number SPI master number (SPIModuleNumber) to initialize.
* @param pointer to a struct of type @ref SPIConfig_t containing the SPI configuration parameters.
* @return
* @retval pointer to direct physical address of the requested SPI module if init was successful
* @retval 0, if either init failed or slave did not respond to the test transfer
*/
uint32_t* spi_master_init(SPI_module_number_t spi_num, SPI_config_t *spi_config);
/**
* Transmit/receive data over SPI bus.
*
* @note Make sure at least transfer_size number of bytes is allocated in tx_data/rx_data.
*
* @param spi_num SPI master number (SPIModuleNumber)
* @param transfer_size number of bytes to transmit/receive over SPI master
* @param tx_data pointer to the data that needs to be transmitted
* @param rx_data pointer to the data that needs to be received
* @return
* @retval true if transmit/reveive of transfer_size were completed.
* @retval false if transmit/reveive of transfer_size were not complete and tx_data/rx_data points to invalid data.
*/
bool spi_master_tx_rx(SPI_module_number_t spi_num, uint16_t transfer_size, const uint8_t *tx_data, uint8_t *rx_data);
/**
* Transmit data over SPI bus.
*
* @note Make sure at least transfer_size number of bytes is allocated in tx_data.
*
* @param spi_num SPI master number (SPIModuleNumber)
* @param transfer_size number of bytes to transmit/receive over SPI master
* @param tx_data pointer to the data that needs to be transmitted
* @return
* @retval true if transmit/reveive of transfer_size were completed.
* @retval false if transmit/reveive of transfer_size were not complete and tx_data/rx_data points to invalid data.
*/
bool spi_master_tx(SPI_module_number_t spi_num, uint16_t transfer_size, const uint8_t *tx_data);
/**
* Receive data over SPI bus.
*
* @note Make sure at least transfer_size number of bytes is allocated in rx_data.
*
* @param spi_num SPI master number (SPIModuleNumber)
* @param transfer_size number of bytes to transmit/receive over SPI master
* @param rx_data pointer to the data that needs to be received
* @return
* @retval true if transmit/reveive of transfer_size were completed.
* @retval false if transmit/reveive of transfer_size were not complete and tx_data/rx_data points to invalid data.
*/
bool spi_master_rx(SPI_module_number_t spi_num, uint16_t transfer_size, uint8_t *rx_data);
#endif

View file

@ -1,5 +1,168 @@
//
// Created by jf on 12/2/19.
//
#include <hal/nrf_gpio.h>
#include <libraries/delay/nrf_delay.h>
#include "st7789.h"
#include "spi_master_fast.h"
using namespace Pinetime::Drivers;
ret_code_t st7789::Init() {
InitHw();
InitCommands();
}
ret_code_t st7789::InitHw() const {
nrf_gpio_cfg_output(ST7735_DC_PIN);
SPI_config_t spi_config;
spi_config.pin_SCK = ST7735_SCK_PIN;
spi_config.pin_MOSI = ST7735_MOSI_PIN;
spi_config.pin_MISO = ST7735_MISO_PIN;
spi_config.pin_CSN = ST7735_SS_PIN;
spi_config.frequency = SPI_FREQ_8MBPS;
spi_config.config.fields.mode = SPI_MODE3;
spi_config.config.fields.bit_order = SPI_BITORDER_MSB_LSB;
spi_master_init(SPI0, &spi_config);
return 0;
}
void st7789::InitCommands() {
SoftwareReset();
SleepOut();
ColMod();
MemoryDataAccessControl();
ColumnAddressSet();
RowAddressSet();
DisplayInversionOn();
NormalModeOn();
DisplayOn();
}
void st7789::WriteCommand(uint8_t cmd) {
nrf_gpio_pin_clear(ST7735_DC_PIN);
WriteSpi(&cmd, 1);
}
void st7789::WriteData(uint8_t data) {
nrf_gpio_pin_set(ST7735_DC_PIN);
WriteSpi(&data, 1);
}
void st7789::WriteSpi(const uint8_t* data, size_t size) {
// APP_ERROR_CHECK(nrf_drv_spi_transfer(&spi, data, size, nullptr, 0));
spi_master_tx(SPI0, size, data);
}
void st7789::SoftwareReset() {
WriteCommand(static_cast<uint8_t>(Commands::SoftwareReset));
nrf_delay_ms(150);
}
void st7789::SleepOut() {
WriteCommand(static_cast<uint8_t>(Commands::SleepOut));
nrf_delay_ms(500);
}
void st7789::ColMod() {
WriteCommand(static_cast<uint8_t>(Commands::ColMod));
WriteData(0x55);
nrf_delay_ms(10);
}
void st7789::MemoryDataAccessControl() {
WriteCommand(static_cast<uint8_t>(Commands::MemoryDataAccessControl));
WriteData(0x00);
}
void st7789::ColumnAddressSet() {
WriteCommand(static_cast<uint8_t>(Commands::ColumnAddressSet));
WriteData(0x00);
WriteData(0x00);
WriteData(Height >> 8);
WriteData(Height & 0xff);
}
void st7789::RowAddressSet() {
WriteCommand(static_cast<uint8_t>(Commands::RowAddressSet));
WriteData(0x00);
WriteData(0x00);
WriteData(Width >> 8);
WriteData(Width & 0xff);
}
void st7789::DisplayInversionOn() {
WriteCommand(static_cast<uint8_t>(Commands::DisplayInversionOn));
nrf_delay_ms(10);
}
void st7789::NormalModeOn() {
WriteCommand(static_cast<uint8_t>(Commands::NormalModeOn));
nrf_delay_ms(10);
}
void st7789::DisplayOn() {
WriteCommand(static_cast<uint8_t>(Commands::DisplayOn));
nrf_delay_ms(500);
}
void st7789::FillRectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color) {
// rudimentary clipping (drawChar w/big text requires this)
if((x >= Width) || (y >= Height)) return;
if((x + width - 1) >= Width) width = Width - x;
if((y + height - 1) >= Height) height = Height - y;
SetAddrWindow(0+x, ST7789_ROW_OFFSET+y, x+width-1, y+height-1);
uint8_t hi = color >> 8, lo = color;
uint32_t c = color + (color << 16);
nrf_gpio_pin_set(ST7735_DC_PIN);
for(y=height+ST7789_ROW_OFFSET; y>ST7789_ROW_OFFSET; y--) {
for(x=width; x>0; x--) {
WriteSpi(reinterpret_cast<const uint8_t *>(&c), 4);
}
}
}
void st7789::SetAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) {
WriteCommand(static_cast<uint8_t>(Commands::ColumnAddressSet));
WriteData(x0 >> 8);
WriteData(x0 & 0xff);
WriteData(x1 >> 8);
WriteData(x1 & 0xff);
WriteCommand(static_cast<uint8_t>(Commands::RowAddressSet));
WriteData(y0>>8);
WriteData(y0 & 0xff);
WriteData(y1 >> 8);
WriteData(y1 & 0xff);
WriteToRam();
}
void st7789::WriteToRam() {
WriteCommand(static_cast<uint8_t>(Commands::WriteToRam));
}
void st7789::DisplayOff() {
WriteCommand(static_cast<uint8_t>(Commands::DisplayOff));
nrf_delay_ms(500);
}
void st7789::Uninit() {
}
void st7789::DrawPixel(uint16_t x, uint16_t y, uint32_t color) {
if((x < 0) ||(x >= Width) || (y < 0) || (y >= Height)) return;
SetAddrWindow(x, y, x+1, y+1);
nrf_gpio_pin_set(ST7735_DC_PIN);
WriteSpi(reinterpret_cast<const uint8_t *>(&color), 2);
}

View file

@ -1,14 +1,56 @@
//
// Created by jf on 12/2/19.
//
#pragma once
#ifndef PINETIME_ST7789_H
#define PINETIME_ST7789_H
namespace Pinetime {
namespace Drivers {
class st7789 {
public:
ret_code_t Init();
void Uninit();
void DrawPixel(uint16_t x, uint16_t y, uint32_t color);
void DrawRectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint32_t color);
void FillRectangle(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t color);
private:
ret_code_t InitHw() const;
void InitCommands();
void SoftwareReset();
void SleepOut();
void ColMod();
void MemoryDataAccessControl();
void DisplayInversionOn();
void NormalModeOn();
void WriteToRam();
void DisplayOn();
void DisplayOff();
void SetAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
void WriteCommand(uint8_t cmd);
void WriteSpi(const uint8_t* data, size_t size);
enum class Commands : uint8_t {
SoftwareReset = 0x01,
SleepOut = 0x11,
NormalModeOn = 0x13,
DisplayInversionOn = 0x21,
DisplayOff = 0x28,
DisplayOn = 0x29,
ColumnAddressSet = 0x2a,
RowAddressSet = 0x2b,
WriteToRam = 0x2c,
MemoryDataAccessControl = 036,
ColMod = 0x3a,
};
void WriteData(uint8_t data);
void ColumnAddressSet();
static constexpr uint16_t Width = 240;
static constexpr uint16_t Height = 240;
void RowAddressSet();
};
}
}
class st7789 {
};
#endif //PINETIME_ST7789_H

View file

@ -8,6 +8,7 @@
#include <libraries/timer/app_timer.h>
#include <libraries/gpiote/app_gpiote.h>
#include <libraries/gfx/nrf_lcd.h>
#include <drivers/st7789.h>
#include "nrf_gfx.h"
@ -21,7 +22,7 @@ Pinetime::Logging::DummyLogger logger;
Pinetime::Applications::BlinkApp blinkApp;
TaskHandle_t systemThread;
Pinetime::Drivers::st7789 lcd;
extern "C" {
void vApplicationIdleHook() {
@ -45,8 +46,48 @@ static void bsp_event_handler(bsp_event_t event)
}
}
extern const nrf_lcd_t nrf_lcd_st7735;
static nrf_lcd_t const * p_lcd = &nrf_lcd_st7735;
ret_code_t lcd_init() {
lcd.Init();
}
void lcd_dummy() {
};
void lcd_pixel_draw(uint16_t x, uint16_t y, uint32_t color) {
lcd.DrawPixel(x, y, color);
}
void lcd_rectangle_draw(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint32_t color) {
lcd.FillRectangle(x, y, width, height, color);
}
void lcd_rotation_set(nrf_lcd_rotation_t rotation) {
}
void lcd_display_invert(bool invert) {
}
static lcd_cb_t st7789_cb = {
.height = 240,
.width = 240
};
const nrf_lcd_t nrf_lcd_st7789 = {
.lcd_init = lcd_init,
.lcd_uninit = lcd_dummy,
.lcd_pixel_draw = lcd_pixel_draw,
.lcd_rect_draw = lcd_rectangle_draw,
.lcd_display = lcd_dummy,
.lcd_rotation_set = lcd_rotation_set,
.lcd_display_invert = lcd_display_invert,
.p_lcd_cb = &st7789_cb
};
extern const FONT_INFO orkney_24ptFontInfo;
static void gfx_initialization(void)
{
nrf_gpio_cfg_output(14);
@ -56,24 +97,53 @@ static void gfx_initialization(void)
nrf_gpio_pin_set(22);
nrf_gpio_pin_set(23);
APP_ERROR_CHECK(nrf_gfx_init(p_lcd));
APP_ERROR_CHECK(nrf_gfx_init(&nrf_lcd_st7789));
nrf_gfx_rect_t rect;
rect.height = 10;
rect.width = 10;
rect.x = 10;
rect.y = 10;
nrf_gfx_rect_draw(p_lcd, &rect, 2, 0xffffffff, true);
rect.height = 240;
rect.width = 240;
rect.x = 0;
rect.y = 0;
nrf_gfx_rect_draw(&nrf_lcd_st7789, &rect, 2, 0xaaaaaaaa, true);
nrf_gfx_point_t point;
point.x = 10;
point.y = 10;
nrf_gfx_font_desc_t font;
font.charInfo = orkney_24ptFontInfo.charInfo;
font.data = orkney_24ptFontInfo.data;
font.endChar = orkney_24ptFontInfo.endChar;
font.height = orkney_24ptFontInfo.height;
font.spacePixels = orkney_24ptFontInfo.spacePixels;
font.startChar = orkney_24ptFontInfo.startChar;
nrf_gfx_print(&nrf_lcd_st7789,
&point,
0xffff,
"#Pinetime\nRocks!",
&font,
true);
}
void SystemTask(void *) {
APP_GPIOTE_INIT(2);
app_timer_init();
bsp_board_init(BSP_INIT_LEDS|BSP_INIT_BUTTONS);
bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
nrf_gpio_cfg_output(14);
nrf_gpio_cfg_output(22);
nrf_gpio_cfg_output(23);
nrf_gpio_pin_clear(14);
nrf_gpio_pin_clear(22);
nrf_gpio_pin_clear(23);
gfx_initialization();
// lcd.Init();
// lcd.FillRectangle(0,0,240,240,0xffaa);
// lcd.FillRectangle(10,10,50,50,0x011bb);
//
// lcd.FillRectangle(120,120,120,120,0x1212);
blinkApp.Start();

View file

@ -4384,13 +4384,13 @@
// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
//==========================================================
#ifndef NRFX_SPIM_ENABLED
#define NRFX_SPIM_ENABLED 1
#define NRFX_SPIM_ENABLED 0
#endif
// <q> NRFX_SPIM0_ENABLED - Enable SPIM0 instance
#ifndef NRFX_SPIM0_ENABLED
#define NRFX_SPIM0_ENABLED 1
#define NRFX_SPIM0_ENABLED 0
#endif
// <q> NRFX_SPIM1_ENABLED - Enable SPIM1 instance
@ -4435,7 +4435,7 @@
// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
#define NRFX_SPIM_CONFIG_LOG_ENABLED 1
#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level
@ -6456,7 +6456,7 @@
// <e> SPI_ENABLED - nrf_drv_spi - SPI/SPIM peripheral driver - legacy layer
//==========================================================
#ifndef SPI_ENABLED
#define SPI_ENABLED 1
#define SPI_ENABLED 0
#endif
// <o> SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
@ -6488,7 +6488,7 @@
// <e> SPI0_ENABLED - Enable SPI0 instance
//==========================================================
#ifndef SPI0_ENABLED
#define SPI0_ENABLED 1
#define SPI0_ENABLED 0
#endif
// <q> SPI0_USE_EASY_DMA - Use EasyDMA
@ -8146,7 +8146,7 @@
#endif
#ifndef ST7735_ENABLED
#define ST7735_ENABLED 1
#define ST7735_ENABLED 0
#endif
// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module
@ -9621,7 +9621,7 @@
// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef SPI_CONFIG_LOG_ENABLED
#define SPI_CONFIG_LOG_ENABLED 1
#define SPI_CONFIG_LOG_ENABLED 0
#endif
// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level
@ -12967,6 +12967,10 @@
#define ST7735_SS_PIN 25
#endif
#ifndef ST7789_ROW_OFFSET
#define ST7789_ROW_OFFSET 0
#endif
// <o> ST7735_IRQ_PRIORITY - Interrupt priority